copy of S080 ALUMINIUM CYLINDER WO/ VALVE 11,1 L
11.1 liters (80 cubic feet) tank made of aluminum alloy 6061-T6. CE approval. Flat bottom. Dimensions: Diameter - 184.2 mm; Height - 658 mm. Weight: 14.2 kg
11.1 liters (80 cubic feet) tank made of aluminum alloy 6061-T6. CE approval. Flat bottom. Dimensions: Diameter - 184.2 mm; Height - 658 mm. Weight: 14.2 kg
High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.
5.7 liters (40 cubic feet) tank made of aluminum alloy 6061-T6. CE approval. Flat bottom. Dimensions: Diameter - 133.4 mm; Height - 645 mm. Weight: 7.3 kg
High pressure hose for pressure gauge 18 cm length. Special to set the pressure gauge on side stage or bailout tank regulator.
HP high pressure hose for pressure gauge 65 cm length. Connect the first stage regulator with a pressure gauge.
HP high pressure hose for pressure gauge 70 cm length. Connect the first stage regulator with a pressure gauge.
The best solution to blend Nitrox while emptying B50 safety. Allows to blend any Nitrox up to 40 % of O2. The technique consists in mixing the Nitrox before passing it through the compressor. It is for this reason that we can not exceed 40 % of O2.
HP high pressure hose for pressure gauge 80 cm length. Connect the first stage regulator with a pressure gauge.
The solution to mix Nitrox, Trimix, Triox and Héliox while emptying B50. Allows to mix any Nitrox, Trimix, Triox and Héliox having a maximal rate of 40% of O2. The technic consists in making Nitrox, Trimix, Triox or Héliox before compressing it by the mean of the compressor. That is why we must not exceed 40% of O2.
HP high pressure hose for pressure gauge 110 cm length. Connect the first stage regulator with a pressure gauge.
LP Low pressure hose 20 cm length with pipe clip to attach to a low pressure inflator . Especially for sidemount.
Full set of twin cylinders, DIR configured according to standards and includes the following items: 10 liters tanks in long format, working pressure 200 bar, thread M 25x2 tap EN144 and concave bottom, Twin cylinders valve with manilfold and isolation valve, Stainless steel rings 171 mm in diameter
LP Low pressure hose with racord to attach to on low pressure inflator BPI, 55 cm length.
Full set of twin cylinders, DIR configured according to standards and includes the following items:12 liters tanks in long format, working pressure 232 bar, thread M 25x2 tap EN144 and concave bottom, Twin cylinders valve with manilfold and isolation valve, Stainless steel rings 171 mm in diameter